ONVIF for reolink not working

[titro]

Hey guys,

first of all: awesome work. I've tested the last couple of days almost all relevant NVRs but i really like lightnvr!

Unfortunately ONVIF with reolink is not working. I have a Reolink Doorbell POE and a Reolink Duo 3 PoE. First it seems ONVIF Subscription is working but right after that:

2026-04-11 21:20:12INFO[Detection] [Klingel] Successfully created ONVIF subscription for http://192.168.178.53:8000
2026-04-11 21:20:12INFO[Detection] [Klingel] ONVIF Detection: Sending PullMessages to http://192.168.178.53:8000/onvif/PullSubManager?Idx=552422553
2026-04-11 21:20:12INFO[Detection] [Klingel] ONVIF Detection: Sending request to http://192.168.178.53:8000/onvif/PullSubManager?Idx=552422553
2026-04-11 21:20:12INFO[Detection] [Klingel] Creating ONVIF request with WS-Security authentication
2026-04-11 21:20:12ERROR[Detection] [Klingel] ONVIF request to http://192.168.178.53:8000/onvif/PullSubManager?Idx=552422553 failed with HTTP code 400
2026-04-11 21:20:12ERROR[Detection] [Klingel] [ONVIF Detection] SOAP Fault: Code=SOAP-ENV:Sender, Reason=(none)
2026-04-11 21:20:12ERROR[Detection] [Klingel] Failed to pull messages from subscription
2026-04-11 21:20:12WARN[Detection] [Klingel] [Klingel] ONVIF detection failed with error -1
2026-04-11 21:20:11INFO[Detection] [Klingel] [Klingel] Running detection (interval=10s, elapsed=10s, model=onvif)
2026-04-11 21:20:11INFO[Detection] [Klingel] ONVIF Detection: Starting detection with URL: http://192.168.178.53:8000
2026-04-11 21:20:11INFO[Detection] [Klingel] ONVIF Detection: Stream name: Klingel
2026-04-11 21:20:11INFO[Detection] [Klingel] ONVIF Detection: Using camera with authentication (username: lightnvr)
2026-04-11 21:20:11INFO[Detection] [Klingel] ONVIF subscription for http://192.168.178.53:8000 expired, creating new one

User is korrekt, ONVIF with ispy was working.

And:

You have a retention at the detection part:

and in addition to that in the ONVIF Part:

What config is then active? Or why to configure AI Detection ONVIF if you also have to separately activate that under Motion Recording?

Any ideas?

Cheers
titro

[dpw13]

Hmm. The ONVIF conformance document for the Reolink Duo 3 PoE definitely says it supports profile T. I don't have any of these cameras to test with.

@titro is there any chance you can take a packet capture on port 8000 between your NVR and your camera with both iSpy and lightNVR? Heads up, that will include authentication credentials so you may want to change the password if you do decide to upload your packet capture. It will not include any video, though. I would be happy to look through the packet captures and see what iSpy is doing differently.

[titro]

Hmm. The ONVIF conformance document for the Reolink Duo 3 PoE definitely says it supports profile T. I don't have any of these cameras to test with.

@titro is there any chance you can take a packet capture on port 8000 between your NVR and your camera with both iSpy and lightNVR? Heads up, that will include authentication credentials so you may want to change the password if you do decide to upload your packet capture. It will not include any video, though. I would be happy to look through the packet captures and see what iSpy is doing differently.

Will try. Need a few days for that.